I had installed a Fire Bottle setup in the previous build, and found the installation to be clean and simple. I repeated the same installation in the SM.
The bottle mounts behind the passenger seat using the supplied mounting plate. I had to be careful, since the holes for the bolts ended up just inches from the fuel and brake lines that run beneath the floor.
To mount the pull handle, I re-purposed a lock hasp from a gate hardware set and screwed it into the tunnel.
I ran the tubing and placed the nozzles so that one points at the driver, and the other in the engine bay facing the injectors.
I also retained the hand held fire extinguisher, which can prove very valuable if the grass below the car or some part not covered by the bottle catches fire.